 |
Digital Caliper Series |
 |
Digital Calipers |
|
Depth Gauges |
|
Height Gauges |
|
Special-purpose |
|
Indicators |
|
Scale Units |
|
Vernier Caliper Series |
|
Vernier Calipers |
|
Vernier Depth Gauges |
|
Vernier Height Gauges |
|
Vernier Special Calipers |
|
Protective Scale Stickers |
 |
|
| HOME>>PRODUCTS>>Digital Caliper Series>>Special-purpose | ||
Centerline
Digital Calipers with Conical Points  Description£ºPower on/off. Zero-setting at any position. Units conversion. Data output.Center distance over £¾¦µ1 between two holes can be obtained by adjusting the length of a measuring spindle on the left and moving the slider. Distance between a plane and a hole can also be obtained. |
 |
|
| Offset
Digital CaliperDescription£º Manual power on/off Metric/Inch system interchange at any position. Zero setting at any position. With pointed jaws. Main scale jaw can be slid up and down to facilitate measurement of stepped sections |
 |
|
| Digital
Calipers with Upper Jaws in One DirectionDescription£º
Manual power on/off. Metric/inch system interchange at any position. Zero setting at any position. With data output interface. To measure the step distance on the same surface and in the same direction. To measure the step distance in the same direction but on different surfaces. |
 |
|
| Outside
Groove Digital CaliperDescription£º Can measure the diameter of outside groove of a workpiece. Power on/off. Units conversion. Zero-setting at any position. |
 |
|
| Cylinder
Outside Groove Digital CaliperDescription£º Manual power on/off. Metric/Inch system interchange at any position. Zero setting at any position. With pointed jaws. Easy to measure the width of an outside groove . |
 |
|
| Tube
Digital CaliperDescription£ºTo
measure the tube wall thickness if the tube's internal diameter is
4mm or more. |
 |
|
| Inside
Groove Digital CaliperDescription£º Manual power on/off. Metric/Inch system interchange at any position. Zero setting at any position. With pointed jaws. Easy to measure the width of an inside groove. |
 |
|
| Knife-Point
Inside Groove Digital CalipersDescription£º Can obtain a diameter of a small groove in a hold through thinner probes. Power on/off. Inch/mm conversion at any position. Zero-setting at any position. |
 |
|
| Hook
Type Digital CalipersDescription£º Manual power on/off. Zero setting at any position. Metric/inch system interchange at any position. With data output interface. Easy to measure the width of an inside groove. Easy to measure the distance between two inside grooves¡£ |
 |
|
| Long
Jaw Inside Digital Caliper Description£º With long jaws, it's easy to obtain the diameter of deep hole. |
 |
|
| Digital
Brake Drum GagesDescription£º Manual power on/off Metric/Inch system interchange at any position Zero setting at any position. With data output interface To measure the wear dimension of the automobile brake drum. |
 |
|
| Single
Point Digital CalipersDescription£º Manual power on/off. Zero setting at any position. Metric/inch system interchange at any position. With data output interface. Easy to measure the thickness of an inside groove. |
 |
|
| Tal
Thickness CaliperDescription£º Manual power on/off. Metric/Inch system interchange at any position. Zero setting at any position. With data output interface. To measure the thickness of metal sheet. |
 |
|
| Plate
Anvil Digital Calipers with a Force Limit DeviceDescription£º Manual power on/off. Metric/Inch system interchange at any position. Zero setting at any position. With data output interface. To measure the half-soft board (foamed plastic,sponge,plank). |
 |
|
| Digital
Welding GagesDescription£º Facilitate measurement of welding thickness. Power on/off. Units conversion. Zero-setting at any position. Data output. |
 |
|